Deye SUN-5K-SG01LP1-EU Repair Guide

5KW Storage Inverter Repairing Guide
SUN-5K-SG Repair Guide
When you see this sub-guide, it indicates that there is a problem
with the machine and needs to open the machine housing for
service. Before opening the Inverter Shell, the inverter's power
cables (including AC and DC) need to be disconnected altogether.
Wait at least 5 minutes before you can proceed.
1. Remove the screws counterclockwise
2. After removing the housing, carefully remove the shell, the housing liquid crystal
plate is connected to the inside of the machine. Take a photo of the interior and record
the location of each harness to prevent errors during installation and send us photos.

Deye SUN-5K-SG01LP1-EU Specifications

General

Model	SUN-5K-SG01LP1-EU
Type	Hybrid Inverter
Rated Power	5000 W
Max. DC Input Power	6500 W
Start-up Voltage	150 V
Number of MPPT Trackers	2
Number of Strings per MPPT Tracker	1
Max. Input Current per MPPT Tracker	13A
Rated AC Output Power	5000 W
Max. AC Output Power	5500 VA
Rated AC Voltage	230 V
AC Voltage Range	180-280V
Rated AC Frequency	50/60Hz
THDi	<3%
DC Injection Current	<0.5% In
Switching Time	10ms
Max. Charging Power	5000 W
Max. Discharging Power	5000 W
Battery Voltage Range	40-60V
Max. Charging Current	100 A
Max. Discharging Current	100 A
Max Efficiency	97.6%
Noise Level	<30 dB
Protection Degree	IP65
MPPT Voltage Range	125 V - 550 V
Power Factor	0.8 leading to 0.8 lagging
Communication with BMS	CAN
Operating Temperature	-25°C to +60°C
Humidity	0~95%