40
2
Hardware Installation
This jack is used to connect to the front right and front left
speakers of the audio system.
Mic-in Jack (Pink)
This jack is used to connect an external microphone.
Front Audio
The front audio connector (J26) allows you to connect to the line-
out and mic-in jacks that are at the front panel of your system.
BIOS Setting
Configure the onboard audio in the Integrated Peripherals submenu
(“Onboard Device” section) of the BIOS. Refer to chapter 3 for
more information.
Driver Installation
Install the audio driver. Refer to chapter 4 for more information.
To Next Page
Loading...
