2
Hardware Installation
43
2.7.9 LEDs
DIMM Standby Power LED
This LED will turn red when the system’s power is on or when it is
in the Suspend state (Power On Suspend or Suspend to RAM). It
will not light when the system is in the Soft-Off state.
PCI Standby Power LED
This LED will turn red when the system is in the power-on, Soft-Off
or Suspend (Power On Suspend or Suspend to RAM) state.
Important:
Lighted LEDs serve as a reminder that you must power-off the
system then turn off the power supply’s switch or unplug the
power cord prior to installing any memory modules or add-in
cards.
PCI Standby
Power LED
DIMM Standby
Power LED
To Next Page
Loading...
