After Sales Support TEL：1800 189 941 14
INSTRUCTIONS
Mode
Choose “ON” activates the timer.
Event
You can set the action (Power On/ Record/ LivePlay) that you would like the STB to
perform when the timer is triggered.
Channel
You can select Channel.
REC Duraction
Set the recording length.
2.3 System Settings
Press the Right button, then press OK button in main menu. The following screen
will appear.
< MENU Setting >
In this menu, you can use the Left/Right button to change the settings, Up/Down to
select the item or press EXIT to cancel.
Transparency
This setting controls the OSD transparency level.
Info Timeout
Select the duration of the visibility when the banner is displayed.
<Video Setting >
Output
You can switch between YPbPr and VGA mode.
Resolution
You can select the
display mode (1080i/720p/576p).
OutputFreq
You can switch freq between 50Hz and 60Hz.
To Next Page
Loading...
