After Sales Support TEL：1800 189 941 19
INSTRUCTIONS
< Auto Search >
If you press OK in Automatic Search of Installation Menu, the STB will scan TV and
RADIO programs automatically. (The default password is 0000)
< Version Info >
Show the hardware and software version.
< Factory Default >
Deletes all the data and settings currently saved and brings the system to the initial
status.
< Usb Upgrade >
An upgrade can be performed using the USB port. (The default password is 0000
only to be advised by DGTEC technician)
2.8 EPG
EPG shows the event information on the current and all channels. The event is
displayed only for the channels that have EPG information. If you press EPG, the
following screen will appear.
To Next Page
Loading...
