After Sales Support TEL：1800 189 941 8
ASSEMBLY AND PARTS LIST
1.6 Connecting to Equipment
1. Connect your TV antenna cable to the “ANT IN” jack on the back of the PVR using
coaxial RF cable.
YPbPr connection
2. Connect the YPbPr out connectors and AUDIO L/R out connectors on the back of
the PVR STB to the COMPONENT IN on your television using RCA-type cables.
VGA
3. Connect the VGA out connector and AUDIO L/R out connectors on the PVR STB
to the “A/V IN” connectors and VGA on your Computer Monitor using computer
monitor and RCA-type cables.
To Next Page
Loading...
