22
TROUBLE SHOOTING
Ps2 Trouble Shooting
Check the STB according to the procedures detailed below.
If the STB does not work properly after conducting Problem Solving Protocols,
please contact the technical department. This unit contains dangerous voltages,
never remove the cover.
When not in use for a long period, it is recommended that you unplug the unit from
the main power socket.
Problem Solution
No Power
Check the power cord for defects.
Check mains power switch is on.
Press power button on RCU.
Check toggle switch on back of unit is on.
No Reception
Check the Signal Strength Indictor and check
the antenna cable and that the antenna has
been inserted correctly.
No Sound
Volume may be set to low or audio muted.
Check the audio cable connection.
No Video
Change video output port or video display type.
Check the video cable connection.
The remote control is in operation,
but the STB is not responding
Check the batteries.
Check the battery contact.
No Channels in the Channel List Please rescan channels.
To Next Page
Loading...
