5
ASSEMBLY AND PARTS LIST
1.3 Rear Panel
1. ANT OUT
Use to connect an extra analogue or digital STB.
2. ANT IN
Use to connect an antenna.
3. DIGITAL AUDIO (Coaxial / Optical)
Connect to an External Audio Amplifier with
S/PDIF Coaxial/Optical Digital Audio.
4. HDMI Connector
Connect
High-Definition Multimedia output
to HD Monitors (HDMI Type).
5. YPbPr
Connect component video to HD Monitors (YPbPr Type).
6. VIDEO (Yellow RCA)
Connect to a TV with video input.
7. AUDIO L/R (White / Red RCA)
Connect to a TV audio input, HD
Monitors audio input or an External Audio Amplifier.
8. USB
USB port is used for viewing external files on a memory stick, and for possible software upgrades
(to be advised by DGTEC technician)
To Next Page
Loading...
