DIAL RCH-RTY2-0 - Battery Replacement and Usage Tips

REMOTE CONTROL
3
1. Point the remote control toward the air condioner and
make your selecons. The indoor unit will beep if the signal
is received.
2. The remote control will operate the air condioner at a
distance up to 23 (7m).
3. Check that there is no object between the remote control
and the signal receptor in the indoor unit.
4. Never leave the remote control exposed to direct sunlight.
5. Keep the remote control at least 3.5 feet (1m) from the
television or other electrical appliances.
Use 2 AAA (1.5V) baeries.
Do not use rechargeable baeries.
When the display is no longer legible, replace the 2
old baeries with new ones of the same type and at
the same me. Dispose of baeries responsibly per
regulatory requirements.

Storage and Tips for Using the Remote Control
Remove the baery cover plate from the rear of the remote control, by sliding it in the direcon
of the arrow.
Install the baeries according to the direcon (+ and -) shown on the Remote Control. Reinstall
the baery cover by sliding it into place.
The remote control may be mounted on a wall with a
remote control holder (oponal part).