Diamond Shield Professional
Instruction Manual
Bringing into service
Insert the battery
1. Open the battery compartment cover on the back of the
device.
2. Insert the supplied battery. Please keep in mind that the
battery has to be inserted correctly according to its polarity.
(If however the battery is inserted incorrectly, the device will
not be damaged by that.)
We recommend using alkaline batteries or rechargeable batteries.
Connecting the cables
1. Connect the connection cable for the bracelet-electrodes in
the right socket (above LED)
2. Connect the bracelets.
3. If you want to work with grounding: Connect the grounding
cable to the left socket. Then connect the grounding wire to
the plug socket.
To Next Page
Loading...