Diamond Shield Zapper IE - Working with Chip Cards; Chip Card Types and Overview; Playing Frequency Programs from Chip Cards

Diamond Shield Professional
Instruction Manual
Page 19
Working with the chip cards
Overview
As accessory, different types of chip cards are available:
 Predefined chip cards contain permanently stored
sequences and frequency programs.
 Master chip cards are delivered empty and can be
programmed by your therapist with individual sequences and
frequency programs.
Playing frequency programs from a chip card
Regardless of the type of chip card, their sequences and frequency
programs can be played as follows:
1. Insert the chip card in the device.
2. Press the POWER button.
3. Select the menu item "chip card" from the main menu and
press the OK button.
4. A submenu will pop up displaying the sequence(s) of the
chip card.
5. If you want to play an entire sequence, then select this
sequence, and then press the RUN button.
6. If you want to play a single frequency program, you first
select the corresponding sequence. Then press the OK
button to enter the submenu. Then select the desired
frequency program and press the RUN button.