EasyManua.ls Logo

Diamond DK7/2-NP - Starting the Machine; Washing Cycle Procedure

Diamond DK7/2-NP
109 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INSTRUCTION MANUAL FOR DISHWASHERS
5
GB
THE FOLLOWING IS ALSO IMPORTANT:
1. Never start a wash programme without the overflow in the tub.
2. Before you drain the tub, make sure you shut off the machine.
3. Never place magnetic objects near the machine, it may start even when the door is open.
4. Do not use the upper part of the machine as a support surface.
5. The installation technician is required to check for proper earthing.
6. When testing is complete, the installation technician must issue a written statement concerning correct
installation and testing in accordance with all standards and acceptable working practices.
3.1 Normal service conditions
Ambient Temperature : 40°Cmax /4°Cmin ( average 30°C)
Altitude : until 2000 metrical
Relative humidity : max 30% at 40°C / max 90% at 20°C
Transport and Storage : between -10°C and 55°C with peack until 70°C ( max 24 hrs )
Chap 4 MACHINE USE
4.1 Legend and symbol
Fig.1 shows:
1
ON/OFF BUTTON
2
DRAIN PUMP ACTIVATION
BUTTON(*)
3
TIME SELECTION BUTTON
4
START BUTTON
5
POWER ON INDICATOR LIGHT
6
CYCLE LIGHT
7
HEATING LIGHT
(*) Only in versions with drain pump.
Indicator light off Indicator light blinking Indicator light on

Table of Contents

Related product manuals