- At the end of each working shift, before cleaning,
maintenance or transfer operations, disconnect the
electrical power.
WARNINGS FOR THE MAINTENANCE OPERATOR
- Follow the instructions indicated in this manual.
- Always use personal safety equipment and other
protective equipment.
- Before starting any maintenance operations, make
sure that the mixer, if it was used, has cooled down
(electric motor).
- If any of the safety devices is no longer calibrated
or faulty, the mixer must also be considered
inoperative.
- Disconnect the electrical power before working on
electrical or electronic parts and connectors.
3 HANDLING AND TRANSPORT
The machine is provided complete with all of the
necessary parts in a closed package attached to a
wooden pallet with straps.
Pay attention to the machine's tendency to become
unbalanced.
The machine must be unloaded from the transport
vehicle, lifting it with suitable equipment.
To transport the machine to its installation area, use a
rolling cart with an adequate load capacity.
During lifting operations, avoid sudden movements.
To Next Page
Loading...
