5.2 EQUIPMENT HOOK-UP
5.2.1 Electrical connection
It is sufficient to connect the power supply cable to
the electrical mains power supply.
The electrical outlet must be easy to access, no
moving should be necessary.
To overcome the phenomenon that generate
transient changes in current and in the presence
of a speed variator (inverter) fit on the machine, it
is necessary that the electric system is equipped
with a super immunized differential switch, type
“si”, guaranteeing the continuous availability of
the electric current in full safety.
The electrical connection (plug) must be easily
accessible, also after installing the mixer.
The distance between the machine and the socket
must be adequate so that the power supply cable is
not strained. In addition, the cable must not be
located under the machine support feet or wheels.
If the power supply cable is damaged, it must be
replaced by the technical assistance service or
by a qualified technician to prevent any risks.
To Next Page
Loading...
