The user must comply with all local, national and
European safety regulations.
The equipment must be installed on floors with
adequate load capacity.
The assembly and disassembly instructions for the
mixer are reserved for specialized technicians.
It is always recommended that users contact our
assistance service for requesting qualified technicians.
If other technicians intervene, it is recommended to
make certain of their skills.
Prior to starting machine assembly or disassembly, the
installer must comply with the safety precautions
foreseen by law, and in particular must:
A) not work in adverse conditions;
B) work in perfect psycho/physical conditions and
must check that the individual and personal
safety devices are integral and perfectly
functional;
C) wear safety gloves;
D) wear safety shoes;
E) use tools that are electrically insulated;
F) make sure that the area used for assembly and
disassembly is free of any obstacles.
4.2 MACHINE INSTALLATION LOCATION
The figure below illustrates the minimum distances that
must be respected when positioning the machine to
facilitate use, cleaning and maintenance of the mixer.
To Next Page
Loading...
