910Ef Owner’s Manual
31
Sound Se ngs “Sound Se ng” will post in the Lower Display. “Sound” will also post in the Matrix Display, followed by a
fl ashing “On” or “Off ” to indicate the current se ng. Scroll between the two se ngs via the UP and DOWN
arrow keys, pressing the ENTER key to confi rm the selec on and launch the Backlight Se ngs mode.
Backlight “Backlight Se ng” will post in the Lower Display. “Backlight” will scroll once in the Matrix display, followed
Se ngs by a fl ashing “High” or “Low” to indicate the current se ng. Scroll between the two se ngs via the UP and
DOWN arrow keys. Confi rm the se ng by pressing the ENTER key. Demo Mode Se ngs will launch
Demo Mode “Demo Mode se ngs” will post in the lower display. “Demo Mode” will also scroll once in the Matrix Display,
Se ngs followed by a fl ashing “On” or “Off ” to indicate the current se ng.
Demo Mode On = console never powers off .
Demo Mode Off = console power off a er four (4) minutes of inac vity.
Scroll between the two se ngs via the UP and DOWN arrow keys, pressing the ENTER key to confi rm the
selec on and launch the Total Time and Total Distance viewing mode.
Total Time & “Total run me” will post in the Lower Display fi eld, followed by the value represen ng the length of me
Total Distance the unit has been operated. “Total distance” will then post followed by the total cumula ve me value.
Values This value represents the amount of me the unit has been in one of the program Run modes. The
console will then return to the Idle screen.
CONSOLE SETUP
To Next Page
Loading...
