910Ef Owner’s Manual
35
Heart Rate Programs Setup Mode
Once a Classic Program has been selected on-screen messaging will guide the user throughout the Setup Mode.
User Selec on
“Select user” will post in the Lower Display. “User 1” or the previously-entered User 1 name value will scroll in the Matrix
Display. Use the UP and DOWN arrow keys to view the user selec on op ons (“User 1”, “User 2” or “Guest”). When the desired
user profi le is displayed, press the ENTER key to select.
User 1 / User 2 If the User 1 or User 2 profi les are selected and the User Setup mode steps for the selected profi le have not
been completed, the console will launch the User Setup mode to obtain the necessary informa on (see the
sec on tled User Setup Mode for more informa on). Once the console has stored the required informa on,
the program will launch.
Guest User If the Guest profi le is selected; the user will be prompted to enter their age value. To ensure the program
operates safely, it is important to enter the correct user informa on.
Target Heart Rate Selec on (Target Heart Rate program only)
If the Target HR program has been selected, the user must also provide the target heart rate in beats-per-minute (BPM). Adjust
the displayed value via the UP and DOWN arrow keys, pressing ENTER to confi rm and launch the program.
PROGRAMS
To Next Page
Loading...
