mini GAC®
11001-1437-200701
QUICK START GUIDE / 6
OPERATOR’S MANUAL
IMPORTANT: A slight tilt when holding and testing grain is
acceptable. If tilt is more than 10 degrees, an
error warning is possible.
10. When grain test completes, press Enter to store the results.
Press Enter again to see the average of all samples and
press the Up or Down Arrows to scroll through all previous
readings.
11. Press the Home button to return to the Home menu.
IMPORTANT: Refer to the Error Codes and Troubleshooting
section if an error displays after a grain test.
Figure 4
Scoop, Pull Slide, Strike Grain
1. Scoop 2. Pull Slide 3. Strike Grain
To Next Page
Loading...
