C/68
Getting to Know and Using the Vehicle
Mod. Agri Farmer
- ATTENTION: - Read the SAFETY REGULATIONS (contained in this manual) carefully for the safety of all personnel and your vehicle.
A
A
(g.144/C)
(g.145/C)
(g.146/C)
1
HYDRAULIC BRAKE SYSTEM
FOR TRAILERS
(OPTIONAL)
The trailer brake act under pressure. The vehicle hydraulic cir-
cuit supplies constant pressure to the trailer braking system.
This pressure is modulated by means of the brake pump.
The indicator light (fig.144/C pos.”A”) signals low braking
system pressure.
Connect the trailer’s hydraulic braking system to that of the
vehicle using the hydraulic socket (g.145/C pos.”1”). If not
being used, the socket must be suitably protected by its
hydraulic socket cover (g.145/C pos.”2”).
- ATTENTION
Do not move the vehicle until the indicator light has switched
off, as the trailer may not brake properly.
- ATTENTION
Verify that all connections are attached properly and that
the trailer brakes regularly before moving the vehicle. Do
not move the vehicle with the trailer attached in the event of
malfunctions.
- ATTENTION
Connect the trailer to the towing hook (fig.146/C pos.”A”)
before inserting the hydraulic part.
- ATTENTION
When the trailer is disconnected, use caution to prevent it
from moving in an uncontrolled manner.
To Next Page
Loading...