(g.20/C)
(g.21/C)
“A”
“C”
“B”
1
2
1
2
3
SEAT BELTS
(g.20/C)
To fasten seat-belts:
1. Slide the tab (1) into the buckle (2) (pic.”A”).
2. Make sure it has been clicked in properly, then t the belt
around your body and adjust (pic.”B”).
- ATTENTION
The belt is correctly adjusted when it ts tightly around the
waist (g.21/C).
To unfasten the seat-belt (tab. ”C”):
1. Press the red button (3) on the buckle (2).
2. Slide the tab out (1).
- ATTENTION
Drive the vehicle only with the seat belt properly fastened
and adjusted. Driving with the seat-belt unfastened, increas-
es the risk of accidents.
- ATTENTION
Do not use damaged or warn seat belts.
Do not use seat belts installed on vehicles that have been
involved in accidents. Worn, damaged or weak the seat belts
may break or give in during a collision, causing serious injury
to the operator.