EasyManua.ls Logo

DieHard DH-6M - Charge Time Estimation Table; Maintenance Instructions; Charger Care and Servicing

DieHard DH-6M
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
BATTERY SIZE/RATING
CHARGE RATE/
CHARGING TIME
2 AMP 6 AMP
SMALL
BATTERIES
Motorcycle,
garden,
tractor, etc.
6 - 12 AH 2 - 4 hrs 45 min - 1 ¼ hrs
12 - 32 AH 4 - 10 hrs 1¼ – 3½ hrs
CARS/TRUCKS
200 - 315 CCA 40 - 60 RC 11 ¼ - 14 ½ hrs 3¾ – 4¾ hrs
315 - 550 CCA 60 - 85 RC 14 ½ - 18 ¼ hrs 4¾ – 6 hrs
550 - 1000 CCA 80 - 190 RC 18 ¼ - 34 ¾ hrs 6 – 11½ hrs
MARINE/DEEP CYCLE
80 RC 17½ hrs 6 hrs
140 RC 27 hrs 9 hrs
160 RC 30 hrs 10 hrs
180 RC 33 hrs 11 hrs
MAINTENANCE INSTRUCTIONS13.
After use and before performing maintenance, unplug and disconnect the 13.1
battery charger (see sections 6, 7 and 8).
Use a dry cloth to wipe all battery corrosion and other dirt or oil from the 13.2
terminals, cords, and the charger case.
Ensure that all of the charger components are in place and in good working 13.3
condition, including the plastic boots on the battery clips.
Servicing does not require opening the unit, as there are no user- 13.4
serviceable parts.
All other servicing should be performed by qualied service personal.13.5
MOVING AND STORAGE INSTRUCTIONS14.
Store charger unplugged, in an upright position. Cord will still conduct 14.1
electricity until it is unplugged from outlet.
Store inside, in a dry, cool place.14.2
Do not store clips on the handle, clipped together, on or around metal, or 14.3
clipped to the cables.
If the charger is moved around the shop or transported to another location, 14.4
take care to avoid/prevent damage to the cords, clips and charger. Failure to
do so could result in personal injury or property damage.

Related product manuals