test function at any time.
Press simultaneously the keys for a
few seconds to enter the PROGRAMMING
menu, the message PRG appears, then
parameter F in the first display will indicate
and the configuration in use
Choose the desired configuration by pressing
the UP/DOWN keys choosing between:
• 0: three probes without fan control.
• 1: four probes with fan control.
• 2: four probes without fan control.
• 3: three probes with fan control
• 4: access to the advanced programming
menu.
>> Paragraph ADVANCED
PROGRAMMING
The following values are then proposed, modifiable with the keys , to
be confirmed with the key .
P: PRE-ALARM, default 140
To Next Page
Loading...
