EasyManuals Logo

Digi ConnectPort LTS 8 Command Reference

Digi ConnectPort LTS 8
169 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #110 background imageLoading...
Page #110 background image
Command descriptions set serial
ConnectPor LTS Command Reference
110
set serial [port=
range
]
Options
port={range|internalmodem}xbee}
Used to specify the serial port. Optional on a single-port device. To configure settings for an internal
modem port, specify port=internalmodem” To configure settings for an XBee port, specify
“port=xbee.
altpin={on|off}
Determines whether the altpin option, which swaps DCD with DSR so that eight-wire RJ-45 cables can
be used with modems, is used:
on
The altpin option is used.
off
The altpin option is not used.
The default is off”.
baudrate=bps
The baud rate in bits per second. The default is 9600.
databits ={5|6|7|8}
The character size, which can be 5, 6, 7, or 8 bits. The default is 8.
flowcontrol={none|hardware|software|custom}
Specifies which kind of flow control is used on the line.
none
No flow control.
hardware
Hardware flow control (RTS/CTS).
software
Software flow control (Xon/Xoff).
custom
Custom flow control, as specified by the customflow option.
The default is none.”
parity={none|even|odd|mark|space}
The parity used for the line.
none
No parity.
even
Even parity.

Other manuals for Digi ConnectPort LTS 8

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Digi ConnectPort LTS 8 and is the answer not in the manual?

Digi ConnectPort LTS 8 Specifications

General IconGeneral
BrandDigi
ModelConnectPort LTS 8
CategoryServer
LanguageEnglish

Related product manuals