Digi ConnectPort LTS 8 Command Reference

Command descriptions set system
ConnectPort® LTS Command Reference
137
set system
Purpose
Configures and displays system-identifying information, such as a description of the device, its
location, and a contact person.
Required permissions
For products with two or more users, permissions must be set to “set permissions s-service=read” to
display network service settings, and “set permissions s-services=rw” to display and change network
service settings.
Syntax
Change system-identifying information
set system [description= string ]
[location= string ]
[contact= string ]
Display system-identifying information
set system
Options
description=string
A description of this device. The maximum length is 64 characters. The default is “”.
location=string
The location of this device. The maximum length is 64 characters. The default is “”.
contact=string
The contact for this device. The maximum length is 64 characters. The default is “”.
Example
Set description, contact, and location
#> set system description=”Engineering printer”
location=”Room 1347” contact=”John Doe at x-3749”
See also
n revert
n show

Digi ConnectPort LTS 8 Specifications

General

Brand	Digi
Model	ConnectPort LTS 8
Category	Server
Language	English