Digi ConnectPort LTS 8 Command Reference

Command descriptions set snmp
ConnectPort® LTS Command Reference
125
Set DES algorithm as privacy protocol.
aes
Set AES algorithm as privacy protocol.
trap_priv_pwd=password
Specifies the SNMPv3 trap privacy password.
trap_engine_id=string
Specifies SNMPv3 trap engine ID.
Examples
Enable authentication failure traps
#> set snmp trapdestip=10.0.0.1 authfailtrap=on
Specify a new private community string
#> set snmp privatecommunity=”StLucia72!”
See also
n revert
n To disable and enable SNMP, use the “set service” command. See set service.
n To disable and enable SNMP alarm traps, see set alarm.

Digi ConnectPort LTS 8 Specifications

General

Brand	Digi
Model	ConnectPort LTS 8
Category	Server
Language	English