Digi ConnectPort LTS 8 Command Reference

Command descriptions set host
ConnectPort® LTS Command Reference
64
set host
Purpose
Configures a name for the device, also known as a host name, or displays the current host name for
the device.
Required permissions
For products with two or more users, permissions must be set to
“set permissions s-host=read” to display the current host name, and
“set permissions s-host=rw” to display and set the host name. See
"set permissions" for details on setting user permissions for commands.
Syntax
Configure a host name for the device
set host name= name
Display the current host name
set host
Options
name=name
The name for the device. The name can be up to 32 characters long, and can contain any alphanumeric
characters, and can also include the underscore ( _ ) and hyphen ( -) characters. To enter a multiple-
word name with spaces, enclose the name in quotation marks, as shown in the example below.
Examples
#> set host name=CPLTS
#> set host name=”CPLTS DIGI”
See also
show

Digi ConnectPort LTS 8 Specifications

General

Brand	Digi
Model	ConnectPort LTS 8
Category	Server
Language	English