Digi ConnectPort LTS8 Command Reference

Command descriptions set sysauth
ConnectPort® LTS Command Reference
132
The index number associated with the system authentication settings. Required when configuring
system authentication settings. To configure authentication settings for Web server, specify
“index=1.” To configure authentication settings for CLI access, specify “index=2.”
authmethod= {local|radius_server|radius_local|
local_radius|radius_down_local|ldap_server|ldap_local|local_ldap|
ldap_down_local}
The authentication method to be used for CLI or Web server. Required when configuring system
authentication settings.
local
The user who registered the local database of ConnectPort LTS through the user can
only access the CLI or Web server.
radius_server
The user who registered the database of Radius server specified can only access the CLI
or Web server.
radius_local
User authentication is performed through the Radius server first. If authentication is
successful, the user can access the CLI or Web server. If authentication fails, user
authentication is performed through local database of ConnectPort LTS again.
local_radius
User authentication is performed through the local database of ConnectPort LTS first. If
authentication is successful, the user can access the CLI or Web server. If
authentication fails, user authentication is performed through the Radius server again.
radius_down_local
User authentication is performed through the Radius server first. If authentication is
successful, the user can access CLI or Web server. If the Radius server does not respond
to the authentication request from the ConnectPort LTS, user authentication is
performed through local database of ConnectPort LTS again. If authentication through
the Radius server fails, authentication through the local database of the ConnectPort
LTS is not performed and the user cannot access the CLI or Web server.
ldap_server
Only the user who registered the database of LDAP server specified can access CLI or
Web server.
ldap_local
User authentication is performed through the LDAP server first. If authentication is
successful, the user can access CLI or Web server. If authentication fails, user
authentication is performed through local database of ConnectPort LTS again.
local_ldap
User authentication is performed through the local database of ConnectPort LTS first. If
authentication is successful, the user can access CLI or Web server. If authentication
fails, user authentication is performed through the LDAP server again.

Digi ConnectPort LTS8 Specifications

General

Brand	Digi
Model	ConnectPort LTS8
Category	Server
Language	English