Digi ConnectPort LTS8 Command Reference

Command descriptions set sysauth
ConnectPort® LTS Command Reference
133
ldap_down_local
User authentication performed through the LDAP server first. If succeeded, user can
access CLI or Web server. But if the LDAP server does not respond to the authentication
request from the ConnectPort LTS, user authentication performed through local
database of ConnectPort LTS again. But if the authentication through the LDAP server is
failed, authentication through local database of ConnectPort LTS is not performed and
the user cannot access CLI or Web server.
accountingsocket=0-65535
The TCP port to be used for authentication communication. The default port number for Radius
authentication is 1813. The primary and the secondary servers are required to use the same TCP port.
LDAP authentication method does not support accounting server and socket options.
authsocket=0-65535
The TCP port to be used for authentication communication. The default port number for Radius
authentication is 1812 and for LDAP authentication is 389. The primary and the secondary servers are
required to use the same TCP port.
primary_authsvr={hostname|ip address}
The IP address or DNS name of authentication server. This option is required for the remote
authentication method. If this server is down or busy, the authentication query is sent to the
secondary server, if specified.
secondary_authsvr={hostname|ip address}
The IP address or DNS name of secondary authentication server. This option is optional.
primary_acctsvr={hostname|ip address}
The IP address or DNS name of accounting server. This option can be specified only when user
accounting is required. If this accounting server is down or busy, the accounting information is sent to
the secondary server, if specified. . The LDAP authentication method does not support accounting
server and socket options.
secondary_acctsvr={hostname|ip address}
The IP address or DNS name of secondary accounting server. This option is optional.
secret=password
A kind of password used for encryption of messages between the Radius authentication server and
the ConnectPort LTS. The server and device server must use the same secret. The primary and the
secondary servers are required to use the same secret.
timeout=0-300
The timeout (specified in seconds) controls how long the ConnectPort LTS will wait for the response
from Radius authentication server. Factory default value is 10.
retries=1-50
Specifies how many times the ConnectPort LTS will try to communicate with the Radius
authentication server. Factory default value is 3.
searchbase =string
The name of the LDAP search base; that is, the distinguished name of the search base object. This
setting defines the location in the directory from which the LDAP search begins.
domainname={hostname|ip address}
If the LDAP database resides on a Microsoft system, the domain name for the active directory must be
configured on this option. If using a non-Microsoft system, do not use this setting, as it changes the
LDAP to comply with Microsoft syntax.
ldapsecopt ={off|start_tls}

Digi ConnectPort LTS8 Specifications

General

Brand	Digi
Model	ConnectPort LTS8
Category	Server
Language	English