Digi ConnectPort LTS8 - Page 150

Command descriptions set usb
ConnectPort® LTS Command Reference
150
set usb
Purposhe
Configure USB device settings and displays current USB settings.
Required permissions
Permissions must be set to one of the following:
n For a user to display the USB settings: “set permissions s-usb=read”
n For a user to display and set the SD memory settings:
“set permissions s-usb=rw”
Syntax
Configure USB device settings
set usb
[id= device id number ]
[state={off|on}
[format]
[fstype={ext2|vfat}]
Configure USB Modem options
These options configure a USB dongle cellular modem.
set usb
[apn= string ]
[pin= string ]
[number= string ]
[auth={none|chap|pap|both}]
[user= string ]
[password= string ]
Display USB information
set usb
Options
id=usb port number
Specifies the USB port number to be set.
state={on|off}
Specifies whether the USB device will be enabled.
on
Enable the USB device.
off