Digi ConnectPort LTS8 Command Reference

Command descriptions set usb
ConnectPort® LTS Command Reference
151
Disable the USB device.
format
Format the device, using a default file system type of ext2. To format with an alternate file system
type, use the “fstype” option.
fstype={ext2|vfat}
The file system type.
ext2
ext2 or second extended filesystem.
vfat
Virtual file allocation table filesystem.
USB Modem options
Obtain the values for these options from your cellular service provider.
apn=string
The Access Point Name (APN).
pin=string
The pin for logging on the USB modem.
number=string
The dial-in number for logging onto the cellular network for the USB modem.
auth={none|chap|pap|both}
The authentication protocol for connections over the USB modem.
none
The remote user does not require authentication.
chap
Challenge Handshake Authentication Protocol (CHAP) authentication is required.
Note MS-CHAP is not supported.
pap
Password Authentication Protocol (PAP) authentication is required.
both
Both CHAP and PAP authentication are required.
The default is “none.” CHAP authentication works between two Digi Connect products. CHAP will be
negotiated to PAP for all other connections.
user=string
The user name for logging onto the cellular network via the USB modem.
password=string
The password for logging the specified username onto the cellular network via the USB modem.

Digi ConnectPort LTS8 Specifications

General

Brand	Digi
Model	ConnectPort LTS8
Category	Server
Language	English