Digi ConnectPort LTS8 Command Reference

Command descriptions set user
ConnectPort® LTS Command Reference
155
Associate a user with a group. A user can be associated with a maximum of two groups.
disassociate
Disassociate a user from a group.
id=1-32
Specifies the ID or range of IDs of the users to be acted on.
name=user name
Specifies the name of the user to be acted on.
newname=new user name
Specifies a new user name.
gid=number
Specifies the identifier for the group being associated with a user. If omitted, the “gname” option
must be specified.
gname=group name
Specifies the name of the group being associated with a user. If omitted, the “gid” option must be
specified.
commandline={on|off}
Specifies whether the user is allowed to access the command line of the device.
on
User can access the command line interface.
off
User can not access the command line interface.
The default is “on.”
groupaccess={on|off}
Specifies whether the user is allowed to use the access rights for any associated groups. This allows a
group to define the access rights for users. For instance, if the user has “commandline=off” and an
associated group has “commandline=on,” then the user will have command line access if
“groupaccess=on.”
on
The user can use group access rights.
off
The user cannot use group access rights.
The default is “off”
defaultaccess={none|climenu|shell}
Specifies the default access method to the ConnectPort LTS device, and the interface that a user will
be given upon logging into the device. Note that the specified interface must be enabled for the user
and have a valid menu and/or group if specified.
none
The user has no default access to the device and must explicitly specify the access type.
If the user and/or associated group has no access rights then the user is not allowed to
access either the command line interface or the Linux shell.

Digi ConnectPort LTS8 Specifications

General

Brand	Digi
Model	ConnectPort LTS8
Category	Server
Language	English