Command descriptions show
ConnectPort® LTS Command Reference
165
ip_v6 : <none> (Stored configuration)
gateway_v6 : <none> (Stored configuration)
ip_6to4tunnel : off off
ip_v4_6to4relay : 192.88.99.1 192.88.99.1
ip_v6_v4addr : <none> <none>
General options
manual_dns : off off
dns1 : 206.13.28.12 0.0.0.0
dns2 : 0.0.0.0 0.0.0.0
idle : 7200 7200
probe_count : 9 9
probe_interval : 75 75
reuse_old_ip : off off
autoip : off off
Display current alarm settings
#> show alarm
Display settings for a particular user
#> show user range=3
See also
n revert
n set user
n set network
n set serial
Note Entering a set command without any options displays the same information as the show
command.
To Next Page
Loading...
Need help?
General