Digi ConnectPort LTS8 Command Reference

Command descriptions set ethernet
ConnectPort® LTS Command Reference
61
Configures the Ethernet speed the ConnectPort LTS product will use on the Ethernet network. Specify
an appropriate setting for your Ethernet network, which can be one of the following:
10
The device operates at 10 megabits per second (Mbps) only.
100
The device operates at 100 Mbps only.
1000
The device operates at 1000 Mbps only.
auto
The device senses the Ethernet speed of the network and adjusts automatically.
The default is “auto.” If one side of the Ethernet connection is using auto (negotiating),
the other side can set the Ethernet speed to whatever value is desired. Or, if the other
side is set for 100 Mbps, this side must use 100 Mbps.
Example
Configure 100 Mbps Ethernet speed
#> set ethernet speed=100
See also
n set network to configure network communications options.
n revert
n show

Digi ConnectPort LTS8 Specifications

General

Brand	Digi
Model	ConnectPort LTS8
Category	Server
Language	English