DC-190 RS-232 PORT SELECTION CHART
The
has two R-232 ports for use with a force
and or
Only two options are available at one time. When
the options to
be used the ports are
being
in the following
There are two primary port options and one secondary port option.
The Force
port
a primary port option controlled by spec 8
9.
The printer port is a primary port option controlled by specs 10
The PC is a secondary port option and is controlled by the port option selected
in spec
the primary option selected in spec 13 assumes its port and the
PC assumes the remaining port.
13
CONNECTOR
Header:
Sub
Din
0: Code 000:
Force
001: Force Bal.
Printer
Title
100: PC Force Bal.
000 1
101:
010: Printer
PC
PC
SPEC 13
SUB
CONTROL SPECS (SUB) CONTROL SPECS (DIN)
000:
Printer Force Bal.
10& 11
8&9 F.B.
001:
Force Bal.
Printer
8&9 Force Bal.
10 & 11
100:
Force Bal.
10
8&9
Force
101:
Force Bal.
8&9 Force
10
010:
Printer
10 & 11 Printer
8&9
011:
Printer
8&9
11
Printer
42
To Next Page
Loading...
