–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
4.4 Programming of Free Format
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 139
Touch [CHARSIZE] key.
Note: All Character Size will be listed
Touch the desired character size. (e.g. M3)
Touch [STATUS] key until the word PRINT
display on the key.
Note: [STATUS] key will toggle for the
following selection, NONWEIGHT,
WEIGHT, PRINT and NO PRINT.
Touch [DISPLAY] folder to view the
programmed screen.
Note: In this Display Mode, character size,
position and angle still allowed to be
changed.(Refer to Note 1.)
To Next Page
Loading...
Need help?
General
