Digi SM-5300 - Page 471

Order Template File
––––––––––––––––––––––––––––––––––––––––––––
55.1 Program Order Template File
M o d e l S M - 5 3 00 O p e r a t i o n M a n u a l | 470
OPERATION
DISPLAY
4.
Enter Order Template number (Ex. 1) then
touch [PLU] key.
5.
To create a new Order Template, touch
[YES] key.
Note: Touch [NO] key to abort.
6.
Touch [TEMPLATE NAME] area to enter
Template Name.
Enter Template Name by touching desired
character keys (Ex. TEMPLATE 1)
Note: Touch [EXIT] key if you want to exit
without saving.
7.
Touch [ENTER] key
Note: Touch [ESC] key if you want to exit
without saving.