Getting Started
The SmartSense Ethernet Gateway is a remote monitoring system that connects directly to an Ethernet cable and
is hardwired onto your network. The gateway also includes a North American power adapter (5V 1A) for
operation. For use on your network, please make sure that the device can communicate out to the following
hostnames:
• tcp.myalertlist.com
• e1.tempalert.com
• e2.tempalert.com
And out of the following ports:
• TCP/443
• TCP/8021
• TCP/8022
• TCP/4344
• TCP/53
• UDP/53
For more information about SmartSense visit www.smartsense.co or call 1-866-806-2653
© 1996
-
2018 Digi International Inc. All rights reserved. All other trademarks are the property of their respective owners.
P5
A1/818
To Next Page
Loading...
Need help?
General
