Welcome Reset the device to factory defaults
Digi WR54 Hardware Reference
13
Reset the device to factory defaults
Resetting the device to factory defaults performs the following actions:
n Clears all configuration settings. When the device boots up again, it uses the configuration in
file config.fac. If the config.fac file has been deleted, the device will regenerate it with the
default Digi configuration.
n Deletes all user files including Python scripts.
n Regenerates SSH keys.
n Clears event and system log files.
n Creates a new event in the event log indicating a factory reset.
To reset the device to factory defaults:
1. Locate the reset button on your device. For the WR54, the Reset button is located on top of the
SIM card slots on the front panel. Remove the SIM cover to access the Reset button.
2. Press and hold the Reset button for 15 seconds. The device reboots automatically.
The device resets to factory defaults. Follow the instructions in Quick start to reconfigure the
device.
To Next Page
Loading...
