Quick start
Congratulations on your Digi WR54 purchase. The following steps guide you through the setup.
Step 1: What's in the box
When you open the WR54 package, look for the following:
n Welcome Card
n The WR54 device
n The WR54 label
Step 2: Gather accessories
Note Digi offers several WR54 accessory kits so you to purchase exactly what you need to support
your WR54. See WR54 support.
Here's the list of accessories used in this Quick start:
Antennas
Use antennas provided by a Digi accessory kit or use alternate antennas that
complies with the WR54 antenna requirements.
Ethernet cable
Use an Ethernet cable to connect the WR54 ETH2, ETH3, or ETH4 port to a laptop
or PC to access the local web interface via a browser or connect to a WAN.
Phillips-head screwdriver
Use a # 1 Phillips-head screwdriver to remove and replace the SIM gasket cover
when installing SIM cards.
Power supply
Use a power supply provided by a Digi accessory kit or use an alternate power
supply that complies with the power supply requirements.
Digi WR54 Hardware Reference
15
To Next Page
Loading...
