EasyManua.ls Logo

DigiDesign 192 I/O User Manual

DigiDesign 192 I/O
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
192 I/O

Other manuals for DigiDesign 192 I/O

Question and Answer IconNeed help?

Do you have a question about the DigiDesign 192 I/O and is the answer not in the manual?

DigiDesign 192 I/O Specifications

General IconGeneral
BrandDigiDesign
Model192 I/O
CategoryAccessories
LanguageEnglish

Summary

Introduction to the 192 I/O

192 I/O Features

Overview of the 192 I/O's key capabilities and specifications.

What's Included

Lists the items packaged with the 192 I/O hardware.

System Requirements

Compatibility Information

Details on hardware and software compatibility for the 192 I/O.

Document Resources and Conventions

About This Guide

Explains the purpose and content of the 192 I/O hardware guide.

Conventions Used in This Guide

Describes symbols and terminology used throughout the document.

About www.digidesign.com

Information on accessing online resources, support, and downloads from Digidesign.

192 I/O Overview

192 I/O Front Panel

Details the controls and indicators on the front of the 192 I/O unit.

Power Switch and LED Ring

Explains the function of the power button and status LED.

Sample Rate Indicators

Describes the LEDs that indicate the current sample rate.

Loop Master and Sync Mode LEDs

Loop Master LED Function

Explains the function of the Loop Master LED.

Sync Mode LED Indicators

Describes the LEDs indicating the current clock source.

Meters

192 I/O Back Panel Details

Input and Output Cards

Details the four bays for I/O cards and their functions.

Analog Input and Output Connectors

Covers the DB-25 connectors for analog audio input and output.

Digital I/O Connectors

Details AES/EBU, TDIF, and Optical (ADAT) I/O ports.

Enclosure Connectors and Sync Ports

Describes built-in AES/EBU, S/PDIF, Optical ports, Loop Sync, and External Clock.

Peripheral Port Limitations

Legacy and Expansion Port Limitations

Explains limitations for using Legacy and Expansion ports.

Accessory Port Status

Notes that the Accessory Port is not supported.

Input and Output Trim Adjustments

Input Trims and Operating Levels

Explains input trim controls and setting input levels for mixers.

Selecting Analog Input Operating Levels

How to switch between +4 dBu and -10 dB(V) input levels.

Soft Clip Limiting

Output Trims and Levels

18 dB and 20 dB Output Levels

Details the two output trim settings for headroom calibration.

Digital Format and Sample Rate Conversion

Installing an I/O Card

Managing I/O Cards: Setup Changes and Troubleshooting

Hardware Setup Changes After Adding a Card

How system settings adjust after installing a new I/O card.

Troubleshooting Card Installation

Common issues and solutions related to card installation.

Hardware Setup Changes After Removing a Card

How system settings adjust after removing an I/O card.

Removing an I/O Card

DB-25 Connector Pinout Diagrams

Analog Output DB-25

Details the pin assignments for the analog output DB-25 connector.

Analog Input DB-25 (+4 dBu and -10dB(V))

Details pin assignments for both +4 dBu and -10dB(V) analog input DB-25 connectors.

AES/EBU DB-25

Details the pin assignments for the AES/EBU DB-25 connector.

TDIF DB-25

Details the pin assignments for the TDIF DB-25 connector.

192 I/O Calibration Mode Instructions

About Calibration and Headroom

Explains calibration concepts and headroom for audio signals.

Calibrating the 192 I/O Outputs

Step-by-step guide for calibrating output levels.

Calibrating the 192 I/O Inputs

Step-by-step guide for calibrating input levels.

Calibrating Mixed Systems

Related product manuals