DigiDesign 192 I/O User Manual

192 I/O Guide2
System Requirements
The Digidesign 192 I/O requires a Digidesign-
qualified Pro Tools|HD system.
Compatibility Information
Digidesign can only assure compatibility and
provide support for hardware and software it has
tested and approved. For a list of Digidesign-
qualified computers, operating systems, hard
drives, and third-party devices, refer to the
Digidesign Web site (www.digidesign.com).
About This Guide
This guide provides a hardware overview of the
192 I/O.
Complete instructions for connecting and con-
figuring the 192 I/O for your Pro Tools|HD sys-
tem are located in the Pro Tools|HD Getting
Started Guide. For additional information about
using Pro Tools software to route your interface
inputs and outputs to Pro Tools inputs and out-
puts, see the Pro Tools Reference Guide.
Conventions Used in This Guide
Digidesign guides use the following conven-
tions to indicate menu choices and key com-
mands:
:
The following symbols are used to highlight im-
portant information:
Convention Action
File > Save Choose Save from the File
menu
Control+N Hold down the Control key
and press the
N key
Control-click Hold down the Control key
and click the mouse button
Right-click Click with the right mouse
button
User Tips are helpful hints for getting the
most from your system.
Important Notices include information that
could affect your data or the performance of
your system.
Shortcuts show you useful keyboard or
mouse shortcuts.
Cross References point to related sections in
this guide and other Digidesign guides.

DigiDesign 192 I/O Specifications

General

Brand	DigiDesign
Model	192 I/O
Category	Accessories
Language	English