DigiDesign Digi 002 Rack Getting Started Guide

Digi 002 & Digi 002 Rack Getting Started Guide 2
• RCA connectors for 2 channels of S/PDIF dig-
ital I/O supporting up to 24-bit, 96 kHz audio
•1 MIDI In port and 2 MIDI Out ports, provid-
ing up to 16 channels of MIDI input and up to
32 channels of MIDI output
• Footswitch jack for punching in and out
while recording
Control Surface Features
(Digi 002 Only)
Digi 002 provides an integrated control surface
for software control that includes the following:
• Eight touch-sensitive moving faders and ded-
icated solo, mute and channel select/record
arm controls
• Eight multi-function rotary encoders for oper-
ating pan, send, and plug-in controls
•Transport and navigation controls
•Ten scribble strips for channel information
display
Stand-Alone Mixing Features
(Digi 002 Only)
Digi 002 can be used as a stand-alone 8-channel
digital mixer with the following features:
•8 analog inputs (4 with mic preamps), with
dedicated volume, pan, solo and mute con-
trols
• Dedicated three-band EQ available on input
channels 1–8
• Dedicated Compressor/Limiter available on
input channels 1–4
• Built-in high-quality Reverb and Delay
• Four sends on each input channel:
• Sends 1–2 dedicated to internal Delay and
Reverb effects
• Sends 3–4 for integrating external effects
• Stereo outputs with dedicated Master Fader
controls, including:
• Main Output pair (+4 dBu fixed signal)
• Monitor Output pair (+4 dBu) mirrors
Main Outputs 1–2 with dedicated volume
control for direct connection to powered
speakers
• Alternate Main Output pair (–10 dBV) mir-
rors Main Outputs 1–2 for direct output to
–10 dBV devices
•Stereo headphone output with level control
•Ten scribble strips for pan/volume and effects
control, send levels, and track names
• Channel metering available using rotary en-
coder LED rings (in Meter mode)

DigiDesign Digi 002 Rack Specifications

General

Brand	DigiDesign
Model	Digi 002 Rack
Category	Musical Instrument
Language	English