DigiDesign Digi 002 Rack Getting Started Guide

Chapter 9: Working with Pro Tools LE 95
Creating a Return
Auxiliary Inputs can be created to act as return
channels for busses, as well as for inputs from
hardware sources.
To create a return:
1 Choose Track > New and specify 1 Mono or
Stereo Auxiliary Input, then click Create.
2 Click the Input selector of the Auxiliary Input
and set it to the bus path you assigned to the
sends on the source tracks.
3 Click the Output selector of the Auxiliary In-
put and choose an output path.
Master Faders
Master Faders are used as output and bus mas-
ters, and can control any mono or stereo output
or bus path in a session. You can then use the
controls on the Master Fader to control the vol-
ume, solo and mute, or apply inserts to those
paths.
Audio and Auxiliary Input tracks configured for a send
and return
Send
Aux Input
to bus 1–2
Send
Real-time plug-in
window
Aux track
input
from
bus 1–2
Aux Input track
Audio tracks
Master Fader controlling main output path
Output assigned to control main mix

DigiDesign Digi 002 Rack Specifications

General

Brand	DigiDesign
Model	Digi 002 Rack
Category	Musical Instrument
Language	English