Chapter 9: Working with Pro Tools LE 97
Mix Automation
Mix automation lets you record, or automate,
changes to track volume, send levels, mutes,
pan, and plug-in parameters.
To write automation:
1 Choose Window > Automation Enable.
2 In the Automation Enable window, enable an
automation type (volume, pan, mute, send level,
send pan, send mute, or any plug-in automa-
tion) by clicking its button so that it is high-
lighted.
3 In each track you want to automate, select an
automation mode with the Automation Mode
selector (Write, Touch, or Latch mode).
4 Start playback and begin writing automation
by adjusting faders and other controls during
playback. Pro Tools LE remembers all moves
performed on enabled parameters.
Once written, automation can be re-written or
displayed and edited graphically in the Edit win-
dow.
Final Mixdown
The Bounce to Disk command lets you write a fi-
nal mix to disk, create a new loop, print effects,
or bounce any submix. Once you have bounced
your final mix to disk, you can use another pro-
gram to burn the resulting file to CD.
When you bounce a track to disk, the bounced
mix includes the following:
Audible Tracks All audible tracks are included in
the bounce. Any muted tracks do not appear in
the bounce. If you solo a track or region, only
the soloed elements appear in the bounced mix.
Automation All read-enabled automation is
played back and incorporated in the bounced
mix.
Inserts and Sends All active inserts, including
real-time plug-ins and hardware inserts, are ap-
plied to the bounced mix.
Selection or Track Length If you make a selec-
tion in a track, the bounced mix will be the
length of the selection. If there is no selection in
any track, the bounce will continue until it
reaches the end of the session.
Enabling automation
Setting the Automation mode of a track
Volume automation in a track in the Edit window
For more information on using automation,
see the
Pro Tools Reference Guide.
Track View
Volume breakpoint automation
To Next Page
Loading...
Need help?
General
