PRE Guide2
System Requirements and
Compatibility Information
When used as a stand-alone microphone pream-
plifier, PRE is ready to use.
For remote control within Pro Tools, PRE
requires:
• A Digidesign-qualified Pro Tools|HD
®
system
• A Digidesign-qualified MIDI interface
Mic Preamps in Pro Tools can be remotely
controlled by Digidesign control surfaces.
Digidesign can only assure compatibility and
provide support for hardware and software it has
tested and approved.
For complete system requirements and a list of
Digidesign-qualified computers, operating sys-
tems, hard drives, and third-party devices, refer
to the latest information on the Digidesign web-
site:
www.digidesign.com/compatibility
Digidesign Registration
Review the enclosed registration information
card and follow the instructions on it to quickly
register your purchase online. Registering your
purchase is the only way you can be eligible to
receive complimentary technical support and
future upgrade offers. It is one of the most im-
portant steps you can take as a new user.
Conventions Used in This
Guide
All Digidesign guides use the following conven-
tions to indicate menu choices and key
commands:
:
The following symbols are used to highlight
important information:
Convention Action
File > Save Choose Save from the File
menu
Control+N Hold down the Control key
and press the N key
Control-click Hold down the Control key
and click the mouse button
Right-click Click with the right mouse
button
User Tips are helpful hints for getting the
most from your Pro Tools system.
Important Notices include information that
could affect your Pro Tools session data or
the performance of your Pro Tools system.
Shortcuts show you useful keyboard or
mouse shortcuts.
Cross References point to related sections in
this guide and other Digidesign Guides.
To Next Page
Loading...
Need help?
General