Digilock Curve - Set Additional Lock Features (For Shared Use Functionality Only); LED Usage Indicator; Auto Unlock

PRODUCT GUIDE
Keypad | Basic & Advanced
7
To Turn Off the LED Usage Indicator To Turn On the LED Usage Indicator
To Turn Off Auto Unlock
Press
=` 92 `
.
The LED will flash.
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn off.
Press
=` 91 `
.
The LED will flash.
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn off.
Press
=` 94 `
.
The LED will flash.
Insert the Programming Key.
A two-tone beep will be heard
and the LED will turn off.
LED Usage Indicator
Auto Unlock
When in shared use functionality, each lock can be programmed to have the LED flash or not flash while the lock is in use. The default
setting is ON (red LED flashes while lock is in use).
When in shared use functionality, each lock can be programmed to auto unlock after a set number of hours. The default setting is OFF
(does not auto unlock).
To Turn On Auto Unlock
Press
=` 95 `
.
The LED will flash.
Insert the Programming Key.
A two-tone beep will be heard
and the LED will flash.
Enter the number of hours from:
1 - 9 9
, then press
`
.
Two sets of two-tone beeps will
be heard and the LED will turn off.
For example: Press
8 `
to set
the lock to auto unlock after 8
hours.
1
1
2
2
1
2
31 2
4
SET ADDITIONAL LOCK FEATURES (FOR SHARED USE FUNCTIONALITY ONLY)