Digilock Curve - Operating Instructions - In Assigned Use Functionality; Operate with an Assigned User Code; Operate with an Assigned User Key; Operate with a Manager Key

PRODUCT GUIDE
Keypad | Basic & Advanced
9
In assigned use functionality, users operate the lock with their assigned user credential (either a User Code or a User Key).
*After 3 consecutive incorrect user code entries, the keypad will be disabled for 1 minute (Sleep Mode).
Operate with an Assigned User Code Operate with an Assigned User Key
Operate with a Manager Key Operate with a Programming Key
Unlock
Unlock
Unlock
Unlock
Relock
Relock
Relock
Relock
Press
=
[an assigned 4-7 digit code]
`
. Press
=
[an assigned 4-7 digit code]
`
*
or Press
= ` `
.
Insert a valid Manager Key. Insert a valid Manager Key
or press
= ` `
.
Insert an assigned User Key. Insert an assigned User Key
or press
= ` `
.
Press
= `
, then insert the
Programming Key.
Press
= `
then insert the
Programming Key
or press
= ` `
.
OPERATING INSTRUCTIONS - IN ASSIGNED USE FUNCTIONALITY