Digilock DK-ATS - Operating Digilock Shared Use with a User Code; Operating Digilock Shared Use with an ADA User Key

45
To Lock
1) Find an available lock.
2) Press: = _ _ _ _ `
(any four-digit code)
To Unlock
1) At same lock.
2) Press: = _ _ _ _ `
(same code used to lock)
To Operate with a User Code
To Lock
1) Find an available lock.
2) Touch any ADA User Key (blue) to key slot.
To Unlock
1) At same lock.
2) Touch the same ADA User Key (blue) to key slot.
To Operate with an ADA User Key
Note: If an incorrect User Code is entered three consecutive times, the lock will go into “Sleep State”
for one full minute or until a registered Manager Key (black) is touched to the lock.