25
PROBLEM CAUSE REMEDY
FOOD TEMP
displayed
is wrong.
(Cont’d)
FOOD TEMP
on GURU
is different
than on a
different food
thermometer.
(Cont’d)
FOOD TEMP on the GURU is 15-
20 degrees hotter than on my
other food thermometers.
Make sure you have the FOOD
PROBE fully inserted into the
food. If too much of the steel
shaft is exposed in the cooker
it will cause the temp to read
hotter since the probe is picking
up heat from inside of the
cooker and not the actual temp
of the food.
The FOOD PROBE is incorrectly
displaying a very high temp.
(Usually in the 400 degree
range)
Your FOOD PROBE may have a
broken connection inside the
wire.**
FOOD TEMP
display
shows”- - -”.
If the DISPLAY reads “- - -” this
means there is an error with the
FOOD PROBE.
Make sure the probe is pushed
all the way firmly into the FOOD
JACK.
Insert the FOOD PROBE into
the PIT JACK and if there is
still “- - -” displayed then the
FOOD PROBE is bad. If the temp
displayed is correct then there
is an issue with the CONTROL
UNIT.**
The FOOD PROBE wire has small
hard reddish bumps present on
the outside of the mesh.
The FOOD PROBE has been
melted by direct flame or
exposure to high temperatures.
You will need to purchase a
replacement FOOD PROBE from
www.bbqguru.com.
17 Troubleshooting Guide
** Please email support@thebbqguru.com for troubleshooting help and warranty/return information.
To Next Page
Loading...