EasyManua.ls Logo

DigiQ DX3 - Power Draft Fans; Fan Damper and Nozzle; Key Operation; Control Button Functions

DigiQ DX3
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
All fans are equipped with an adjustable damper and an aluminum nozzle.
The slide damper can be completely closed to kill the fire or can be adjusted to a
small opening for cold smoking. This feature allows fine adjustments to be made
due to natural drafts that affect cooking temperature during the fans off cycle.
Testing on different settings is recommended. Open the damper fully for quick start
up or grilling at high temperatures. Close halfway for smaller cookers or low and
slow cooking. Close three-quarters of the way for cold smoking.
5 Power Draft Fans
FOOD Shows the food temperature when pressed
PIT Shows the pit temperature when pressed
UP Indexes the setpoint up
DOWN Indexes the setpoint down
FOOD + PIT Powers the unit on or off when both buttons are held
UP + DOWN Enters the setup menu when both buttons are held
KEY PRESS CHIRP
When the Beeper Intensity is set to above 0, any key press will cause an
acknowledge chirp. Setting the Beeper Intensity in the menu to 0 will disable
the chirp.
SILENCING THE BEEPER WITH ANY KEY PRESS
Any time the beeper is sounding, press any key to silence it and clear the alarm
condition. To turn the beeper off, set the Beeper Intensity in the menu to 0.
6 Key Operation
Upon applying power, the DigiQ DX3 will show to test the display and then
show the version number.
If there is a brief or sustained power interruption at any time while cooking,
the DigiQ DX3 will automatically restart and continue to control the pit at the
same settings that were originally set.
7 Powering Up